water flowing from a basin tap

How to Choose Perfect Bathroom Taps Online

Did you know that 63% of our home water usage takes place in the bathroom? Bathroom taps handle a lot of volumes, so it’s no surprise that they can get worn out more quickly than a kitchen tap, for example.

If it’s time to buy new taps, and you’re looking to replace yours by buying bathroom taps online, you need to know how to choose the right tap. Believe it or not, there’s a lot that goes into the decision, including:

  • Style & Function
  • Materials
  • Colour & Finish
  • Water Pressure

These four considerations are crucial to keep in mind while you’re shopping for your next set of bathroom taps. Let’s look at each one in more detail.

Buying Bathroom Taps Online: Shopping for Style

What style is your bathroom? Bathroom taps can say a lot about your personal style, so understanding their different forms is important. At the most basic level, you need to decide how many holes you’ll need.

You might be thinking, “Wait, holes? I don’t want holes in the basin!” We’re not talking leaking holes–we’re talking about the holes for your bathroom taps so that the fixtures can access the plumbing of your home.

We’ll take you from one hole to three, and go over the different styles that can fit each:

Each of these options comes with its own set of benefits. It’s up to you to decide which is right for your bathroom.

Buying Bathroom Taps Online When There are No Holes

Some basins come with pre-drilled holes. Some can be drilled on site. Others, like certain types of stone basins, cannot be.

If you’re installing–or if you already have–one such basin, you might not be able to run a bathroom tap through it. Instead, you’ll want to look at either wall-mounted taps (you drill the holes into the wall) or floor-standing taps (these are free-standing and run vertically alongside the basin).

Both of these types of taps can be in a variety of decorating styles, from traditional to modern.

For One-Hole Basins

If you’re looking for a space-saving, simple and sleek design, then a monobloc tap might be the right choice for you. Of course, it’s important to remember that monobloc taps won’t work everywhere in the UK. The simple reason is that not all UK plumbing designs are made to accommodate the monobloc tap.

However, if you can use this tap type, you can expect a single spout to deliver both hot and cold water–and everything in between. You’ll use a lever to adjust the temperature.

For Two-Hole Basins

Basins with two holes are a great fit for pillar taps. These taps are usually more traditional in style–think Edwardian with enamel inlays. They come in pairs, hence the two-hole setup. Each pair contains a hot spout and a cold spout, with a rotating knob or lever for each one.

For Two- to Three-Hole Basins

For the best of both worlds–a combination of the pillar and monobloc style taps–the mixer tap style can offer an opportunity to meld styles. If you like traditional and modern, this might be the tap style for you. Because of its versatility, the mixer tap is available in both two-hole and three-hole bathroom taps.

Materials

What something is made of matters because it will determine how much use you can get out of your taps. If you’re planning to buy bathroom taps online, knowing about some of the different materials taps are made of can save you money while helping you get the most out of your purchase.

Consider solid brass. This corrosion-resistant material is great for longevity. When bathroom taps corrode, they lose their integrity. They might even start to leak, which can be both wasteful and messy.

Materials inside the taps are equally important. For example, if your taps have rubber washers inside, they might need frequent replacing. Ceramic discs, on the other hand, are more wear resistant.

As an added bonus, they’re also easier to use as they require only a three-quarter turn instead of a full turn in order to operate the tap.

For the Finishing Touch, A Bit of Colour

Bathroom tap finish and colour go a long way to expressing your home’s personality. Brightly coloured taps are fun and light-hearted. They tend to be modern, as well.

Brushed or polished metals such as chrome, nickel or brass can also have a modern look to them, even if the tap style isn’t modern. This can be a fun way to mix modernity and antiquity.

A brushed brass finish usually works great with more traditional styles. If you’re thinking of getting pillar taps, with enamel inlays, chrome is a great place to start.

What’s your water pressure?

Don’t worry, we didn’t forget this important topic. Different bathroom taps can handle different amounts of water pressure. A tap designed for low-pressure systems will fail if water is pushed through at higher pressures.

The consequences can include a range of problems. As you might imagine, too much water pressure can damage your bathroom taps. Damage can result in a leak, which can damage flooring, ceilings below the bathroom, and more. Moisture, where it doesn’t belong, can also contribute to dangerous mold growth.

What about using a high-pressure tap for a low-pressure supply? Well, it won’t cause damage in the same way but it can lead to inconsistent water flow and air in the water lines.

If you’re getting ready to shop for bathroom taps online, you don’t want to make the mistake of choosing taps that can’t handle your water pressure. So how do you know what your water pressure is?

There are two ways to find out what your water pressure is. The first is to use a water pressure gauge. If you’ve never done this before though, it might be best to enlist the help of a plumber.

Before you spend money on getting a plumber out just to tell you your water pressure, call your water supplier and ask. This is probably the simplest method. Be aware that you might get a range of pressures.

If you have any questions about bathroom taps, please contact us.

Leave a Reply

Your email address will not be published. Required fields are marked *